CADETProcess.processModel.LumpedRateModelWithoutPores

class CADETProcess.processModel.LumpedRateModelWithoutPores(total_porosity, c, _q, length, diameter, axial_dispersion, flow_direction, name)

Parameters for a lumped rate model without pores.

Notes

Although technically the LumpedRateModelWithoutPores does not have particles, the particle reactions interface is used to support reactions in the solid phase and cross-phase reactions.

Attributes:

total_porosityUnsignedFloat between 0 and 1.

Total porosity of the column.

cList of unsigned floats. Length depends on n_comp

Initial concentration of the reactor.

qList of unsigned floats. Length depends on n_comp

Initial concentration of the bound phase.

solution_recorderLRMRecorder

Solution recorder for the unit operation.

Methods

NTP(flow_rate)	Number of theoretical plates.
check_required_parameters()	Verify if all required parameters are set.
set_axial_dispersion_from_NTP(NTP, flow_rate)	Set axial dispersion from number of theoretical plates (NTP).
set_diameter_from_interstitial_velicity(Q, u0)	Set diamter from flow rate and interstitial velocity.
t0(flow_rate)	Mean residence time of a (non adsorbing) volume element.
u0(flow_rate)	Flow velocity of a (non adsorbing) volume element.