CADETProcess.processModel.LumpedRateModelWithoutPores

class CADETProcess.processModel.LumpedRateModelWithoutPores(total_porosity, _q, length, diameter, axial_dispersion, flow_direction, c, name)

Parameters for a lumped rate model without pores.

Attributes:

total_porosityUnsignedFloat between 0 and 1.

Total porosity of the column.

cList of unsigned floats. Length depends on n_comp

Initial concentration of the reactor.

qList of unsigned floats. Length depends on n_comp

list[float]: Initial solid phase concentration.

solution_recorderLRMRecorder

Solution recorder for the unit operation.

Methods

NTP(flow_rate)	Calculate number of theoretical plates.
calculate_bodenstein_number(flow_rate)	Calculate the Bodenstein number for a given flow rate.
calculate_flow_rate_from_velocity(u0)	Calculate volumetric flow rate from interstitial velocity.
calculate_interstitial_rt(flow_rate)	Calculate mean residence time of a (non adsorbing) volume element.
calculate_interstitial_velocity(flow_rate)	Calculate flow velocity of a (non adsorbing) volume element.
calculate_superficial_rt(flow_rate)	Calculate mean residence time of a volume element in an empty column.
calculate_superficial_velocity(flow_rate)	Calculate superficial flow velocity of a volume element in an empty column.
check_required_parameters()	Checkf if there are missing parameters left.
set_axial_dispersion_from_NTP(NTP, flow_rate)	Set axial dispersion from number of theoretical plates (NTP).
set_diameter_from_interstitial_velocity(Q, u0)	Set diamter from flow rate and interstitial velocity.

Notes

Although technically the LumpedRateModelWithoutPores does not have particles, the particle reactions interface is used to support reactions in the solid phase and cross-phase reactions.